Crack Presto 2013 Mega [NEW]
To crack a beer bottle, theres two primary methods. Dont count on the beer foam as a protection against moisture and dirt, which can be a problem, especially when opening a cracked beer bottle. The home method is to first crack the top, then pry it out with a utility knife. The other method is to crack the top and pull the bottle out, which is what I tried initially. I broke the top off the first bottle fairly quickly. After a little more practice I found that it was more useful to crack the top from one side of the bottle, then holding the cut edge in my non-dominant hand, pull the bottle out from the other side, then continue with the other half. The other method Ive used is to create a cardboard "duct" for the bottle neck through which I place my finger and pry open the bottle. I use about one finger width in width, which is just enough to allow me to pry the bottle upwards and outwards on the side without moving any part of the finger. Now theres 2 methods to crack a beer bottle, which is what Ive learned, 2 is enough for any number of drinks.
Crack Presto 2013 Mega
90% of my cracking is done for beers, although Im not a staunch Prohibitionist, so it all depends on what Im drinking and who with. Its really no problem at all, and can be a good conversation starter if Im out to dinner and Im trying to get the attention of some busy bimbo. Dont count on the beer foam as a protection against moisture and dirt, which can be a problem, especially when opening a cracked beer bottle. The home method is to first crack the top, then pry it out with a utility knife. The other method is to crack the top and pull the bottle out, which is what I tried initially. I broke the top off the first bottle fairly quickly.